Namimno ExpressLRS ELRS 2.4GHz Flash Low Latency and High Refresh Rate TX Module with OLED Screen Nano Mini RC Receiver For RC FPV Drone
* Large quantities in stock, shipped within 48 hours after ordering.
* We are authorization dealer for all series of Namimno ExpressLRS Sytem products in China. Warmly elcome contact us for wholesale and drop-shipping.
Upgraded the hardware of the V2 module, added OLED (now only supports display, the button function will be available in V2.1 firmware), and optimized the shell.
FLASH_TX is based on the open sourced EXPRESS LRS project, The hardware has been optimized and designed for real world environments, and it adopts the popular Lora SX1280 radio frequency chip with excellent performance. The Express LRS firmware allows for low latency and high refresh rates, suitable for long range flights and FPV racing. The entire transmitter module is built within a JR-style module. Equipped with customized heat sinks and fans, excellent heat dissipation performance ensures the stability of the transmitter module during flight.
FLASH_RX is based on the open-sourced EXPRESS LRS project. The hardware has been optimized and designed for real-world environments giving it a compact size and stable performance. Conveniently upgradable via WIFI.
The Express LRS firmware allows for low latency and high refresh rates. Built-in telemetry functionality sends aircraft parameters in real-time.
Matched with an optimized antenna and enjoy increased distance and telemetry.
2.4GHz Flash TX Module:
Model: FLASH_TX
Wireless frequency: 2400-2480MHz
Transmitting power:
Remote control distance: >3000m
Remote control refresh rate: 25Hz-500Hz
RF interface: SMA-outer screw inner hole (adapted antenna inner screw inner pin)
Power supply: internal power supply: 6-18V, external power supply 6-18V(Suport 4S)
Size: 64*52*40mm
2.4GHz Flash Nano Receiver:
Model: FLASH_RX
Wireless frequency: 2400-2480MHz
Transmitting power:
Remote control distance: >3000m
Remote control refresh rate: 25Hz-250Hz
RF interface: IPEX generation
Power supply: 4.5-10V
Size: 12*10*3.5mm
Package Included:
2.4G Flash TX:
1 x Flash TX Module (with Loop antenna)
Nano RX:
1 x Nano Receiver (with T antenna)
2.4G Nano RX(onboard):
1 x Nano Receiver (onboard antenna racing version)
2.4G TX+3RX:
1 x Flash TX Module (with Loop antenna)
3 x Nano Receiver (with T antenna)
S***r –
SWR could be better. too less C. straight mounted SWR 1:2.0, of you bend it to generate C, SWR drops to 1:1.2 . I don’t understand why manufacturer measure the things and optimize before selling.
L***z –
Had an issue because of which I had to reorder, everything went very smoothly.
t***c –
Works great. Low latency open source. Better than anything on the market. Quality is amazing compared to other modules
U***b –
the product is great and works well.
D***i –
все круто
n***y –
Пришло за пару недель, комплектация отличная. По сборке есть моменты , а именно прищемили корпусом провода.
I***N –
Хочу сделать подробный отзыв. Основное видео на канале RC POINT. Доставка заняла две недели. Продавец отправил без замедления. Хорошая упаковка, товар без повреждений. Прошивка через USB или аппаратуру управления. Переключение режимов мощности до 1000мВт, только через LUA скрипт! Частота и телеметрия переключается только через LUA скрипт. Джойстик и кнопка не функционируют. Вентилятор на модуле включается при достижении заданной мощности. Это установить в LUA скрипте на пульте. Есть блютус для симулятора – режим джойстика, WIFI. Внутри модуль сделан качественно. Пайка хорошая, следов флюса нет. Массивный радиатор и хорошая вентиляция. Но очень много свободного места. Часть модуля, которая установлена в JR полностью пустая, только контакты для гребенки. Пластик хороший, формы четкие, устанавливается плотно, не выпадает. Антенны в комплекте две. Моксон интересная, но ножка не длинная. Торчит не сильно.
Z***s –
Seller was great. Fast shipping. The ELRS module works good, with one problem. The joystick used on the back is a cheap piece of junk. The expressLRS devs finally enabled it to function with a firmware update, so I was trying it out. At first it would not go to the down position without actuating the center click unless carefully pushed with a fingernail edge. Then after about 5 minutes the joystick quit working entirely. I’m sure part of this is due to the fact that the joystick is not even centered in the hole in the housing for it. Anyways I’m satisfied with the rest of the function, I always knew the joystick feature might turn out to be a crapshoot, everything else works though and it reliably controls my quads. It’s just too bad that I bought a new ELRS module for twice the price of my previous one and some of the cool features on it dont even work.
S***r –
Сам модуль собран на esp32, усилитель на 30dbm (1000mW) . После получения обновил до версии 2.1 и джойстик заработал . Качественный корпус , качественная пайка . Рекомендую товар и продавца !
a***a –
пришло быстро все работает