WLtoys XK K123 6CH Brushless AS350 Scale 3D6G System RC Helicopter RTF Upgrade WLtoys V931
Rotor diameter: 244mm
Flying weirht: 79.5g
Flying time: About 5min
Charging time: 30-60min
Control Distance: 150m
Battery: 3.7V 500mAh 25C li-po
Package size: 52.5*24.8*10.3cm
Remote distance: About 150 meters
Motor: 1106 11000KV brushless main motor
8502 coreless tail motor
Compatible with FUTABA S-FHSS
1) According to AS350 (the little squirrel) prototype ratio, high simulation, fine appearance design.
The details of the products, unique in the market three rotor blades flybarless design.
2) Quote aerodynamic blade provides strong power and body self stability.
3) 1106 rotor brushless motor power is stronger, the 3.7V 500mah 25C high rate battery
4) 3D and 6G (also compatible with electronic 3 gyroscopes and 6 axis gyroscope) mode one remote controller can be switched freely
5) 3D mode using 3 axis gyro, sensitive reaction. To do the stunt flying, can easily make rolling inverted pendulum movement
6) 6G mode using 6 axis gyro, flight stability, especially suitable for beginners to flight.
7) 6 channel remote control, a 3D special IDLE switch throttle hold TH.HOLD switch large screen liquid crystal display, low voltage alarm function.
Especially with aircraft hovering point setting, enter the setting mode to set the hover plane according to their needs.
8) With a dedicated USB charger, can also charge 2 batteries.
9) Communication protocol compatible with FUTABA S-FHSS
10) Flying weight 79.5g
11) Transmitter can switch from Mode 1 to Mode 2, vise versa.
1 x K123 rc helicopter
1 x Transmitter
3 x Main blade
1 x Tail blad
1 x Main gear
1 x USB charger
2 x battery
1 x Screwdriver
1 x Hex wrench
If you need model 1 (right throttle) , please leave us a message .
if the XK K123 helicopter is good , but it can not fly properly ,
Folow the Solutions :
1. Please do ‘Gyroscope calibration’
2. Please do ‘6G aircraft hovering mode settings’
3. Please take off the canopy and fly the helicopter , if the helicopter can fly properly without canopy , it show that the canopy press the receiver .
4. Make sure the propellers don’t be too tight or too loose
5. The battery power is low , please charge